HETAS Registered Installer in Gidea Park. Stove installation, chimney lining and twin wall flue systems. Smoke control area checked at survey. DEFRA-approved appliances confirmed where required.
Gidea Park sits immediately east of Romford town centre and carries some of the best housing stock in the borough — large Edwardian and inter-war detached properties along Main Road and the avenues off it, alongside the conservation area around the 1910 exhibition houses. These are typically substantial chimneys in good structural condition, though unlined. A liner installation is common alongside the stove itself. We survey, specify and certify the full scope.
HETAS registered installer, HETAS approved installer, HETAS certified installer — these three terms all refer to the same registration under the HETAS Competent Person Scheme. If you have searched for any of these terms, you are in the right place.
Under the Clean Air Act, local authorities can designate smoke control areas where it is an offence to emit smoke from a chimney when burning certain fuels. In a designated smoke control area, burning ordinary wood in an ordinary stove is not permitted. The exemption applies only to DEFRA-approved appliances — stoves that have been independently tested and confirmed capable of burning wood within permitted smoke emission limits.
Parts of Havering carry smoke control designations. This includes some postcodes within and around Romford and Gidea Park. The boundary of a smoke control area does not follow street lines in an obvious way — two adjacent properties on the same road can fall on different sides of a designation boundary. Postcode alone is not always a reliable indicator. We check designation status at survey using current mapping before any appliance is agreed.
Where a smoke control area applies, only a DEFRA-exempt appliance can be specified. These are listed on the DEFRA website. The DEFRA approval is appliance-specific — the exemption applies to that make and model when burning approved fuel. We confirm DEFRA status before installation proceeds and record it on the compliance certificate. A non-DEFRA appliance installed in a smoke control area is both a building regulation issue and a potential offence under the Clean Air Act. Getting the designation check right at survey stage is not optional — it is part of a correct HETAS installation.
We cover Gidea Park postcode RM2. Main Road, Heath Park Road, Gallows Corner and surrounding streets all within our standard area.
We cover stove installation, chimney lining and twin wall flue systems across Gidea Park and Havering. HETAS compliance certificate on every job.
Pre-installation survey. Professional installation to Approved Document J. CO alarm confirmed in room. Smoke draw test and commissioning. HETAS compliance certificate issued on the day — legal record of building regulation compliance.
Is Gidea Park in a smoke control area?
Parts of Havering, including some postcodes within the RM2 area, are designated smoke control zones. We confirm your postcode status at survey before any installation is agreed. If your address is in a smoke control area, only a DEFRA-approved appliance can be installed when burning wood.
What is a DEFRA-approved stove?
A DEFRA-approved stove is a solid fuel appliance that has been tested and confirmed exempt from smoke control restrictions. It can be used in designated smoke control areas when burning approved wood fuel. We confirm DEFRA approval status as part of the appliance selection process.
Get in touch to discuss your project. Contact us for a survey and quote.
We also cover Harold Wood & Harold Hill. See all areas covered.
